Panorama C23FP-5SP-GNSS FME Male to SMA Male 5 m CS23 Coax Cable With GNSS Labels

Part number C23FP-5SP-GNSS from Panorama Antennas is a ready-made 5 m (16.4 ft) CS23 coax assembly with an FME male termination on one end and an SMA male on the other. Panorama builds this assembly on CS23, its 5 mm double-shielded coaxial cable that outperforms generic RG58/AU on loss and screening. It stays flexible enough for tight dashboard and cabinet routing while the twin shields hold interference out of the feed line. The FME male end mates with the FME female leads fitted to many Panorama antennas, and its slim threaded body pulls through grommets, conduit, and panel holes without needing an oversized opening. The SMA male end threads onto the SMA female antenna ports found on most cellular routers and gateways, including Cradlepoint, Teltonika, Digi, Peplink, and Sierra Wireless hardware. This variant ships with GNSS identification labels fitted to the cable, so the satellite-navigation feed stays distinguishable from cellular runs when several identical black cables travel through the same loom. For best results, treat the feed line as part of the antenna system. Use the shortest practical length, respect the bend radius at each connector, and secure the run so vibration cannot work the couplings loose over time. Panorama Antennas has designed and manufactured antenna systems and RF cable assemblies since 1947, and every CS23 assembly ships with its connectors fitted and tested before it leaves the factory - eliminating the most common failure point in field-built coax.