About This Device
Part number C240N-10SP-5GA from Panorama Antennas is a ready-made 10 m (32.8 ft) CS240 coax assembly with an N-type male termination on one end and an SMA male on the other. Underneath the connectors is CS240, Panorama's ultra-low-loss 6.1 mm coaxial cable with double screening. It holds signal over distances that would starve a 5 mm cable, which is why Panorama fits it to its longer extension assemblies. The N-type male end mates with the N female ports standard on outdoor cellular, 5G, and Wi-Fi antennas, and the large threaded interface tolerates weather and repeated handling. The SMA male end threads onto the SMA female antenna ports found on most cellular routers and gateways, including Cradlepoint, Teltonika, Digi, Peplink, and Sierra Wireless hardware. This variant carries a factory-fitted "5GA" identification label, matching the port markings on Panorama's multi-element 5G antennas. When you pull four identical runs to a 4x4 MIMO antenna, the 5GA label ties this cable to antenna element A at both ends of the run, which removes the guesswork at hookup time. For best results, treat the feed line as part of the antenna system. Use the shortest practical length, respect the bend radius at each connector, and secure the run so vibration cannot work the couplings loose over time. Panorama Antennas has designed and manufactured antenna systems and RF cable assemblies since 1947, and every CS240 assembly ships with its connectors fitted and tested before it leaves the factory - eliminating the most common failure point in field-built coax.