Panorama C32F-5SMARV 5 m CS32 Coax Cable, FME Female to RP-SMA Male

The Panorama C32F-5SMARV puts 5 m (16.4 ft) of low-loss CS32 coax between your equipment and your antenna. Antennas work best where the signal is - on the roof, at a window, above the rack - and this assembly lets the router stay where the power and Ethernet already are. CS32 is Panorama's double-shielded, solid-core 5 mm coaxial cable: a 50-ohm design intended for antenna feed runs where attenuation and interference rejection both matter. The dual shield keeps noise from adjacent power and data cabling out of the feed, and the solid core holds loss well below the thin RG174-class pigtails bundled with many antennas. One end is factory-terminated in a FME female, the other in a RP-SMA male. The compact FME end pulls easily through grommets and tight channels, then mates the FME male fitting on the equipment or adapter side. Reverse-polarity SMA is the interface most Wi-Fi equipment uses, so confirm whether your gear is standard or reverse-polarity before ordering. At 5 m, the run reaches a rooftop penetration, mast base, or far wall. The 5 mm jacket stays flexible enough for conduit, cable glands, and grommet routing, and factory-molded terminations remove the most common failure point of field-crimped coax. Cloud Care Networks carries the C32F-5SMARV alongside the antennas and cellular routers it connects, so network and field-service teams can consolidate feed lines, spares, and hardware on one order. Keeping a spare assembly on the truck turns a damaged run into a five-minute swap instead of a site revisit.