Panorama C32SJ-3NPB 3 m CS32 Coax Cable, SMA Female to N Male

The Panorama C32SJ-3NPB puts 3 m (9.8 ft) of low-loss CS32 coax between your equipment and your antenna. Antennas work best where the signal is - on the roof, at a window, above the rack - and this assembly lets the router stay where the power and Ethernet already are. CS32 is Panorama's double-shielded, solid-core 5 mm coaxial cable: a 50-ohm design intended for antenna feed runs where attenuation and interference rejection both matter. The dual shield keeps noise from adjacent power and data cabling out of the feed, and the solid core holds loss well below the thin RG174-class pigtails bundled with many antennas. One end is factory-terminated in a SMA female (jack), the other in a N-type male (plug). The SMA female end accepts the SMA male lead fitted to most cellular antennas and pigtails. N-type connectors are the norm on outdoor, wideband, and surge-protection hardware, so the N male end mates the bulkhead jacks on that gear. At 3 m, the run reaches across a room or up through a ceiling void. The 5 mm jacket stays flexible enough for conduit, cable glands, and grommet routing, and factory-molded terminations remove the most common failure point of field-crimped coax. A molded strain relief boot supports the cable where it leaves the connector, cutting down the flex fatigue that kills interconnects on gear that gets moved or re-racked. Cloud Care Networks carries the C32SJ-3NPB alongside the antennas and cellular routers it connects, so network and field-service teams can consolidate feed lines, spares, and hardware on one order. Keeping a spare assembly on the truck turns a damaged run into a five-minute swap instead of a site revisit.