Panorama C74-FP-6GT5 6 m RG174 Cable, FME Male to GT5-1S-HU

Integrations built on OEM telematics hardware often specify the GT5 connector family rather than the SMA ports common on off-the-shelf routers. The Panorama C74-FP-6GT5 bridges that gap: 6 m (19.69 ft) of RG174 coax with an FME male on the antenna side and a GT5-1S-HU termination for the equipment side. RG174 is the slim, flexible 50-ohm coax of the antenna world: roughly 2.8 mm in diameter, it bends around tight radii and pulls through grommets, door seals, and cable channels that thicker feed line cannot negotiate. The trade-off is higher attenuation per meter, which is why RG174 leads are kept short and used where routability matters more than every last dB. Six meters gives enough length to run from a roof or shelf antenna position to a module mounted under a dash, behind a panel, or inside an equipment bay. The FME male mates the compact FME female lead fitted to many mobile antennas, so the antenna side installs with a finger-tight thread. The GT5-1S-HU end is factory terminated, which is the practical way to get a reliable joint on a specialty connector - field-building GT5 terminations on thin coax is fiddly work best avoided on an installation line. Cloud Care Networks carries the C74-FP-6GT5 alongside Panorama's FME-terminated antennas and adapter range, so integrators can source the whole harness path from one catalog and keep a documented SKU in the build sheet.