Cloud Care Networks
Inseego

Product photo coming soon

InseegoAccessories

Inseego Wall Mount Bracket for FW2000e, FW2010e, and FW3000 Outdoor CPE (649496 02656 1)

MPN 649496 02656 1

Made for Inseego

$38.38$45.00Save $6.62

Backordered · ships as soon as it arrives

1
Request a quote · volume, multi-site or with plans

Overview

The Inseego 649496 02656 1 is the wall mount bracket for Wavemaker outdoor CPE - the FW2000e, FW2010e, and FW3000. It fixes the radio flat against walls, facades, and parapets where a J-arm's roofline offset is unnecessary, holding the CPE rigid at the aim the installer set. Steel construction at just over three pounds shipped gives the mount real wind-load authority.

  • Wall mount bracket for Inseego Wavemaker outdoor CPE
  • Supports FW2000e, FW2010e, and FW3000
  • Flat wall and facade mounting without roofline offset
  • Steel construction with wind-load margin
  • Ladder-serviceable installs with short cable entries
  • Inseego part number 649496 02656 1
  • Fix outdoor CPE flat to walls and facades with purpose-built geometry
  • Hold commissioning aim for years against wind loading

Not every outdoor CPE install needs to clear a roofline. On masonry walls, building facades, and parapet faces with a clean look toward the serving cell, mounting flat to the wall is simpler, stealthier, and easier to service than any arm or mast. Inseego's 649496 02656 1 is the documented wall bracket for that scenario, supporting the FW2000e, FW2010e, and FW3000.

The bracket's job sounds trivial and is not: hold a wind-loaded radio at a fixed aim for years. Purpose-built geometry mates the Wavemaker chassis without adapter improvisation, the steel carries the CPE with margin, and the fastening pattern gives installers proper anchor placement instead of strap-and-hope. Once torqued, the panel points where commissioning left it.

Wall placement also keeps the install serviceable. A CPE at facade height is reachable from a ladder, its cable entry is short and sealable, and swaps do not involve roof access - all of which matters across hundreds of FWA subscribers.

Cloud Care Networks carries the full Wavemaker mounting family - this wall bracket, the J-arm (649496 02570 0), and the pole bracket (649496 02665 3) - alongside the CPE themselves. Kit the truck with all three and let the site survey decide.

Ideal for

  • Facade-mounting outdoor CPE at homes and businesses
  • MDU installs where wall placement beats roof access
  • FWA rollouts standardizing ladder-serviceable mounting
  • Replacing improvised CPE fixings with documented hardware

Specifications

Package

Shipping Weight
3.10 lb
Units Per Package
1 bracket

Mounting

Surface
Walls, facades, parapet faces
Mount Type
Wall mount bracket

Physical

Construction
Steel

Compatibility

Designed For
Inseego FW2000e, FW2010e, FW3000 outdoor CPE

Questions buyers ask

Which devices does this bracket fit?

Inseego's Wavemaker outdoor CPE family: FW2000e, FW2010e, and FW3000. It is the flat wall option; the J-arm (649496 02570 0) and pole bracket (649496 02665 3) cover roofline and mast installs.

When should I choose the wall bracket over the J-arm?

When the wall itself has a clear signal path to the serving cell. Flat mounting is simpler, easier to reach for service, and avoids roof penetrations; the J-arm earns its place only when the radio must clear a roofline or gutter.

What fasteners does it need?

Anchors appropriate to the substrate - masonry anchors, lags into framing, or through-bolts on panel walls. Seal penetrations per standard exterior practice.

What is in the box?

One Inseego wall mount bracket, part 649496 02656 1. The CPE and its PoE and Ethernet cabling are separate.

More Accessories