Cloud Care Networks
ProClipAccessories

ProClip USA Hard-Wired Pogo Pin Charging Cradle with Spring Lock for Samsung Galaxy Tab Active5 and Tab Active3

MPN 747386
  • Vehicle

Fits Galaxy Tab Active5, Galaxy Tab Active3

$149.67$189.99Save $40.32

In stockShips from the US

1
Request a quote · volume, multi-site or with plans

Datasheets & documents

Overview

The ProClip USA 747386 is a hard-wired pogo pin charging cradle for the Samsung Galaxy Tab Active5 and Galaxy Tab Active3 with original skin. A spring lock holds the tablet until released. The included power supply wires to 12/24 V vehicle power and delivers 15 W (2.7 A). A 15-degree tilt-swivel and AMPS and VESA 75 mm holes fit ProClip vehicle, pedestal, pipe and forklift mounts.

  • Exact-fit pogo pin charging cradle for Samsung Galaxy Tab Active5 and Galaxy Tab Active3 with original skin
  • Spring lock secures the tablet in the cradle until released
  • Hard-wired power supply for 12/24 V vehicle power; 15 W (2.7 A) charging at 5 V output
  • Permanently attached 96 in (243 cm) cable with LED power indicator
  • Tilt-swivel angles 15 degrees in any direction; AMPS and VESA 75 mm mounting holes
  • Made in Sweden from high-grade ABS plastic
  • A permanent hard-wired install frees up the lighter socket and keeps cables tidy
  • The spring lock holds the tablet in place on rough roads and at job sites

The ProClip USA Hard-Wired Pogo Pin Charging Cradle with Spring Lock, item 747386, is built for permanent vehicle installs of the Samsung Galaxy Tab Active5 and Galaxy Tab Active3, fitted to the tablet in its original skin. High sidewalls guide docking and keep the tablet stable through normal vehicle vibration. A spring lock slides over the tablet edge and keeps it in the cradle until the lock is released. Pogo pins provide a durable charging connection for the life of the tablet.

The included hard-wired power supply connects to 12 or 24 V vehicle power. A 3 in (7.6 cm) black box converts it to 5 V output and provides 15 W (2.7 A) of charging power. The cable is permanently attached and runs 96 in (243 cm) including the black box. An LED shows when power is on. The installation sheet rates the supply at 10-30 VDC, 1.1 A input and 5 VDC, 2 A output. Wiring runs white or black to ground and red through a 2 A in-line fuse to positive, and ProClip recommends professional installation. Openings keep the USB-C port and headphone jack accessible while docked.

A tilt-swivel angles the cradle 15 degrees in any direction and rotates it. The AMPS pattern and VESA 75 mm holes fit ProClip vehicle, pedestal, pipe and forklift mounts. The cradle is made in Sweden from high-grade ABS plastic. Included are the cradle (#712386), spring lock (#216493), M4 fastener pack (#217267) and hard-wired power supply (#216260). ProClip provides installation instructions for 747386.

Ideal for

  • Permanent fleet vehicle installs for Galaxy Tab Active5 and Active3 tablets
  • Utility, public safety and service trucks on 12 or 24 V power
  • Forklift and heavy equipment tablet mounts
  • Vehicles where the tablet must stay locked in place between stops

Specifications

Power

Cable
Permanently attached charging cable
Wiring
Ground: white/black; positive: red via 2 A in-line fuse
Cord Length
96 in / 243 cm (with black box)
Input Rating
10-30 VDC, 1.1 A (installation sheet)
Converter Box
Black power conversion box 3 in / 7.6 cm
Output Rating
5 VDC, 2 A (installation sheet)
Vehicle Power
Hard-wire to 12 / 24 V vehicle power; converts to 5 V output
Charging Power
15 W (2.7 A)
Power Indicator
LED power indicator

Design

Fit
Exact-Fit
Power
Charging
Locking
Spring Lock
Case Use
Rugged Case (tablet with original skin)
Charging
Hard-Wired
Data Port
None
Tilt Swivel
Tilt-swivel, 15° any direction
Top Support
Modular Add-On
Power Connection
Pogo Pin

General

MPN
747386
Brand
ProClip USA
Product Name
Hard-Wired Pogo Pin Charging Cradle with Spring Lock for Samsung Galaxy Tab Active5, Active3
Product Type
Device Holders
Origin Material
Made in Sweden from high-grade ABS plastic
Item Description
Pogo Pin Charging Cradle with Tilt Swivel, Spring Lock and 5.4V Hard-Wired Power Supply

Package

Included Items
Cradle, spring lock, M4 fastener pack, hard-wired power supply

Physical

Shipping Weight
1.36 lb

Compatibility

Mount Pattern
AMPS and VESA 75 mm holes
Compatible Devices
Samsung Galaxy Tab Active5 (manufacturer list)
Compatible With Installation Sheet
Samsung Galaxy Tab Active5, Galaxy Tab Active3

Questions buyers ask

What vehicle power does it accept?

The hard-wired supply connects to 12 or 24 V vehicle power. The installation sheet rates it at 10-30 VDC, 1.1 A input, converted to 5 V output for 15 W (2.7 A) charging.

How does the spring lock work?

Slide the spring lock down over the tablet to lock it in the cradle. Slide it up past the tablet edge to release it.

Is professional installation required?

ProClip recommends professional installation. The red wire goes through the 2 A in-line fuse to positive power, and white or black goes to ground or the vehicle chassis.

What is in the box?

The cradle (#712386), spring lock (#216493), M4 fastener pack (#217267) and hard-wired power supply (#216260).

More for Galaxy Tab Active5

More Accessories