Cloud Care Networks
Wilson (weBoost)Antennas & Signal

Wilson Electronics 901150 3/4 in. NMO Mount with 14 ft RG58 Cable and SMA Male

MPN 901150
  • RG-58
  • 3–5 m
$8.08$14.99Save $6.91

In stockFree 2-day shipping

1
Request a quote · volume, multi-site or with plans

Overview

The Wilson Electronics 901150 is a 3/4 in. NMO antenna mount with 14 ft of attached RG-58U cable terminated in an SMA-Male connector. It is built for the weBoost 4G NMO Antenna (314405) and other non-magnet-mount cell phone signal booster antennas. The mount installs through a 3/4 in. hole in a sheet metal surface for a permanent vehicle installation.

  • 3/4 in. NMO through-hole antenna mount
  • 14 ft RG-58U coaxial cable attached
  • SMA-Male connector termination
  • For use with the weBoost 4G NMO Antenna (314405)
  • Also fits other non-magnet-mount cell phone signal booster antennas
  • Requires a 3/4 in. hole in a sheet metal surface
  • Permanent mount holds the antenna securely at highway speeds
  • Clean installation with no external cable run over the door seal

The Wilson Electronics 901150 provides a permanent, through-hole NMO base for a vehicle cell signal booster antenna. It is intended for the weBoost 4G NMO Antenna (314405) and other non-magnet-mount booster antennas. It is the right choice when a magnetic base is not secure enough or does not suit the vehicle.

The mount requires a 3/4 in. hole in a sheet metal surface, such as a roof panel. The antenna threads onto the NMO base on top, and the attached 14 ft RG-58U cable runs inside the vehicle to the booster. The cable ends in an SMA-Male connector. Fourteen feet gives enough length to route the cable along the headliner or pillars to a booster mounted under a seat or in a cargo area.

Fleet managers and upfitters specify NMO mounts because the result is clean, low-profile and resistant to theft and car washes. Use the 901150 for a new permanent installation or to replace a damaged mount and cable.

Ideal for

  • Permanent roof mounting of the weBoost 4G NMO Antenna (314405)
  • Fleet vehicle booster installations
  • Replacing a damaged NMO mount and cable
  • Upgrading from a magnetic antenna base to a permanent mount

Specifications

Cable

Connector
SMA-Male
Cable Type
RG-58U
Cable Length
14 ft

General

MPN
901150
Brand
Wilson Electronics
Product Type
NMO Mount 3/4 inch

Mounting

Mount Size
3/4 in.
Mount Type
NMO
Installation Requirement
Requires 3/4 in. hole in sheet metal surface

Compatibility

Antennas
weBoost 4G NMO Antenna (314405); other non-magnet-mount cell phone signal booster antennas

Questions buyers ask

Which antenna is this mount designed for?

It is designed for the weBoost 4G NMO Antenna (314405) and other non-magnet-mount cell phone signal booster antennas.

What size hole does it need?

It requires a 3/4 in. hole in a sheet metal surface.

What cable and connector are included?

It comes with 14 ft of RG-58U cable terminated with an SMA-Male connector.

More Antennas & Signal