Cloud Care Networks
Panorama

Product photo coming soon

PanoramaAntennas & Signal

Panorama C240N-15T N-Type Male to TNC Male 15 m CS240 Coax Cable

MPN C240N-15T
  • Over 5 m
$85.86$116.64Save $30.78

Backordered · ships as soon as it arrives

Overview

This 15 m (49.2 ft) Panorama assembly, part number C240N-15T, is built on ultra-low-loss 6.1 mm double-screened CS240 coax and fitted with an N-type male connector on one end and a TNC male on the other. It gives installers a tested, ready-to-route feed line for cellular, GPS, and RF antenna systems in vehicles, buildings, and equipment cabinets.

  • Factory-terminated N-type male to TNC male coaxial assembly - no field crimping required
  • 15 m (49.2 ft) of Panorama CS240 6.1 mm (0.24 in) low-loss coaxial cable
  • Ultra-low-loss double-screened construction for long antenna runs
  • 50-ohm impedance for cellular, 5G, GPS/GNSS, and Wi-Fi antenna systems
  • Flexible construction routes through grommets, conduit, and cable trays
  • Built by Panorama Antennas, UK antenna specialist manufacturing since 1947
  • Connect N-type male-terminated equipment to TNC male ports in one tested, ready-made 15 m run
  • Skip field crimping - both connectors are fitted and checked at the factory

Part number C240N-15T from Panorama Antennas is a ready-made 15 m (49.2 ft) CS240 coax assembly with an N-type male termination on one end and a TNC male on the other. Underneath the connectors is CS240, Panorama's ultra-low-loss 6.1 mm coaxial cable with double screening. It holds signal over distances that would starve a 5 mm cable, which is why Panorama fits it to its longer extension assemblies. The N-type male end mates with the N female ports standard on outdoor cellular, 5G, and Wi-Fi antennas, and the large threaded interface tolerates weather and repeated handling. The TNC male end threads onto TNC female ports used on GPS timing receivers, telemetry radios, and many fixed antennas, and the screw coupling stays put under vibration. For best results, treat the feed line as part of the antenna system. Use the shortest practical length, respect the bend radius at each connector, and secure the run so vibration cannot work the couplings loose over time. Panorama Antennas has designed and manufactured antenna systems and RF cable assemblies since 1947, and every CS240 assembly ships with its connectors fitted and tested before it leaves the factory - eliminating the most common failure point in field-built coax.

Ideal for

  • Feeding outdoor N-type cellular and 5G antennas from routers and modems mounted indoors
  • Linking TNC-ported GPS timing receivers and telemetry radios to remote antennas
  • In-vehicle router and antenna installations across fleet, transit, and first-responder vehicles
  • Fixed wireless access sites where the antenna must be placed for signal rather than convenience

Specifications

Package

Brand
Panorama Antennas
Product Type
Coaxial antenna cable assembly
Manufacturer Part Number
C240N-15T

Physical

Cable Length
15 m (49.2 ft)
Cable Diameter
6.1 mm (0.24 in)

Connectivity

Impedance
50 ohms
Shielding
Double shielded
Cable Series
Panorama CS240
Connector End A
N-type male
Connector End B
TNC male

Questions buyers ask

What connectors are on the Panorama C240N-15T?

It is terminated with an N-type male connector on one end and a TNC male on the other, on 15 m (49.2 ft) of Panorama CS240 coaxial cable. Both connectors are fitted at the factory.

Which antennas does the N-type end fit?

It mates with the N female ports found on most outdoor cellular, 5G, LoRa, and Wi-Fi antennas, including Panorama's building and mast-mount ranges. N-type is the usual choice for exterior connections because of its rugged threaded body.

How much signal loss should I expect from a 15 m run?

Every meter of coax attenuates the signal, and loss rises with frequency. CS240 is a thicker ultra-low-loss cable chosen specifically to keep longer runs viable; as a rule, order the shortest length that completes the run and avoid coiling excess cable, since unused length still adds loss.

Are the connectors weatherproof?

The connectors themselves are not sealed against permanent outdoor exposure. For exterior joints, wrap the mated pair with self-amalgamating tape or use a weatherproofing boot, and let drip loops carry water away from the connection.