Panorama C29FR-SP-3SJ-GNSS 3m CS29 Coax Cable, SMA Male to SMA Female with GNSS Labels

The Panorama C29FR-SP-3SJ-GNSS is a 3 m (9.8 ft) factory-built CS29 FRZH coaxial cable assembly, fitted with a threaded SMA male plug on one end and a threaded SMA female jack on the other. It is built for GPS/GNSS antenna runs in telematics and fixed installations, where every dB of cable loss comes straight off your link budget. Panorama's CS29 FRZH cable is double-screened 5 mm coax with a stranded centre conductor, semi-air-spaced dielectric and a flame-retardant, zero-halogen (FRZH) jacket, running at the 50-ohm impedance used across cellular, GNSS and Wi-Fi RF paths. The FRZH jacket meets fire-safety requirements where halogen-free, flame-retardant cable is specified, without giving up the flexibility of the stranded centre conductor. Because both connectors are terminated and tested at the factory, you avoid the loss and reliability penalties of field crimping. On the equipment side, the SMA jack mates with SMA male antenna leads and device pigtails, including most cellular antenna tails. At the other end, the SMA plug connects to the SMA female antenna ports found on most cellular routers and gateways from Cradlepoint, Teltonika, Digi and Peplink. Factory-applied GNSS identification labels identify the GNSS feed at a glance, which matters once several near-identical black cables share a conduit, headliner or cabinet. Typical uses include feeding a roof-mounted GNSS antenna to a router or gateway with GPS input and fleet telematics installs where the GNSS line must stay identifiable in a cable bundle. Route the cable with gentle bends, avoid crushing it under cable ties, and snug threaded connectors evenly to keep the RF joint consistent. For IT teams and installers, a pre-terminated Panorama assembly is the fast path to a clean, repeatable install: pick the length, match the connectors, and skip the crimp tooling entirely.