Cloud Care Networks
Panorama

Product photo coming soon

PanoramaAntennas & Signal

Panorama C32SP-10TNCRV 10 m CS32 Coax Cable, SMA Male to RP-TNC Male

MPN C32SP-10TNCRV
  • Over 5 m
$40.44$54.55Save $14.11

Backordered · ships as soon as it arrives

1
Request a quote · volume, multi-site or with plans

Overview

The Panorama C32SP-10TNCRV is a 10 m (32.8 ft) CS32 coaxial cable assembly terminated SMA male (plug) to RP-TNC male. Double-shielded, solid-core 5 mm low-loss coax carries the antenna feed with far less attenuation than thin pigtail cable, so usable signal actually reaches the radio. Use it to move Wi-Fi antennas clear of racks, metal enclosures, and congested shelving without relocating the access point or router.

  • 10 m (32.8 ft) factory-terminated cable assembly
  • SMA Male to RP-TNC Male termination
  • Double-shielded, solid-core 5 mm CS32 low-loss coax
  • 50-ohm impedance matched to antenna systems
  • Suited to Wi-Fi antenna feed runs on 2.4 and 5 GHz equipment
  • Panorama part number C32SP-10TNCRV
  • Extend antenna placement by 10 m without relocating the router or radio
  • Preserve signal strength with double-shielded low-loss coax instead of thin pigtails

The Panorama C32SP-10TNCRV puts 10 m (32.8 ft) of low-loss CS32 coax between your equipment and your antenna. Wi-Fi antennas buried behind a rack or inside a metal kiosk radiate into steel; this assembly gets them out where clients can actually hear them.

CS32 is Panorama's double-shielded, solid-core 5 mm coaxial cable: a 50-ohm design intended for antenna feed runs where attenuation and interference rejection both matter. The dual shield keeps noise from adjacent power and data cabling out of the feed, and the solid core holds loss well below the thin RG174-class pigtails bundled with many antennas. One end is factory-terminated in a SMA male (plug), the other in a RP-TNC male. The SMA male end threads directly onto the SMA female antenna ports found on most cellular routers, gateways, and modems. Reverse-polarity TNC is common on Wi-Fi access points and their antennas; confirm polarity on your equipment before ordering.

At 10 m, the run reaches rooftop antennas and cross-building pulls that shorter jumpers cannot. The 5 mm jacket stays flexible enough for conduit, cable glands, and grommet routing, and factory-molded terminations remove the most common failure point of field-crimped coax.

Cloud Care Networks carries the C32SP-10TNCRV alongside the antennas and cellular routers it connects, so network and field-service teams can consolidate feed lines, spares, and hardware on one order. Keeping a spare assembly on the truck turns a damaged run into a five-minute swap instead of a site revisit.

Ideal for

  • Connecting RP-TNC access point hardware to SMA female antenna systems
  • Long pulls between Wi-Fi radios and remote-mounted antennas
  • Warehouse and outdoor-adjacent installs mixing TNC and SMA interfaces
  • Replacing stacked adapters with a single factory-terminated assembly

Specifications

Package

Units Per Package
1 cable assembly

Physical

Shielding
Double shielded
Cable Diameter
5 mm
Center Conductor
Solid core

Connectivity

Length
10 m (32.8 ft)
Impedance
50 ohms
Connector A
SMA male (plug)
Connector B
RP-TNC male
Cable Series
Panorama CS32

Questions buyers ask

Will this cable work with my router or antenna?

Yes, provided the connectors match: it is a 50-ohm assembly with a SMA male (plug) on one end and a RP-TNC male on the other. The SMA male end threads directly onto the SMA female antenna ports found on most cellular routers, gateways, and modems. Check your equipment's port type - SMA female is typical on cellular routers from Cradlepoint, Peplink, Digi, and Teltonika, while RP-SMA and RP-TNC are common on Wi-Fi gear.

Does a longer cable reduce signal?

All coax attenuates with length, which is why cable choice matters. The CS32's double-shielded 5 mm solid-core construction keeps loss low for its class, but you should still order the shortest length that reaches and avoid coiling large amounts of excess.

What is in the box?

One factory-terminated 10 m Panorama C32SP-10TNCRV cable assembly. Antennas, adapters, and mounting hardware are sold separately.

More Antennas & Signal