Inseego CBL-00004 DC Power Adapter for Skyus 100 Series, 4-Pin, 7-36 VDC, Flying Leads

Vehicle and industrial DC power is nominally 12 or 24 volts and actually a moving target - cranking sags, alternator surges, long-cable drops. Inseego's CBL-00004 is built for that reality: the DC power harness for Skyus 100 series devices, accepting 7 to 36 VDC across its input range and delivering it to the device through a keyed 4-pin connector. The wide input window is the working feature. At 7 V tolerance, an engine crank that drags a 12 V bus down does not reboot the modem mid-session; at 36 V, a 24 V truck or industrial system with charging headroom stays comfortably in range. One harness therefore serves cars, trucks, heavy equipment, and DC-bused enclosures without per-platform engineering. Flying leads on the supply end are the professional termination: land them on a fused circuit, a terminal strip, or an ignition-switched feed per the installation's wiring standard, with no cigarette-lighter plugs pretending to be permanent infrastructure. The keyed 4-pin device connector seats positively on the Skyus end. Cloud Care Networks carries the CBL-00004 alongside Skyus modems, the ACC-00003 mounting bracket, and the AC counterpart CBL-00006 for bench and mains-powered use. Spec DC for the vehicles and AC for the lab, and every Skyus in the fleet powers from a documented part.