Parsec PC4004L100NM LSR400 Cable Kit for 4-in-1 Antennas, 4 x 100 ft, N-Male to N-Male

The Parsec PC4004L100NM is a four-cable LSR400 kit for connecting a Parsec 4-in-1 (4:1) antenna to a cellular router over a long run. Each of the four cables is 100 ft long and has N Type male connectors on both ends. That gives one dedicated run for each cellular element of the antenna, so all four paths are the same cable type and length.

Parsec treats the cable as part of the link budget between the cell tower and the router. Its cable guidance recommends LSR200 for runs up to 25 ft, LSR240 for runs up to 40 ft, and LSR400 for runs of 40 ft and longer. The reason is that cable loss rises with both length and frequency. At 100 ft, this kit uses the heaviest cable in Parsec's range, which is the grade the manufacturer specifies for long installations where loss would otherwise cut into signal quality.

The N Type connectors are the waterproof, hand-tightened style Parsec describes for outdoor connections. That makes them a good fit for antennas mounted on poles, rooftops and masts, where the router sits well inside the building.

The kit ships as a single OEM-packaged box containing four LTE cables. Parsec's Cables and Connectors datasheet and Part Number Legend document the part number and cable selection guidance.