Cloud Care Networks
LantronixAntennas & Signal

Lantronix A14H0 Two-in-One LTE and GNSS Adhesive Antenna, IP67

4G LTEMPN A14H0
  • Single (SISO)
  • GNSS
  • Under 3 dBi
  • 1–3 m

Made for Lantronix

$40.54$53.95Save $13.41

Backordered · ships as soon as it arrives

1
Request a quote · volume, multi-site or with plans

Overview

The Lantronix A14H0 is a two-in-one remote antenna that carries LTE and GNSS in one IP67-rated, adhesive-mount housing. It receives GPS, GLONASS and Galileo. Rated gain is 2.5 dBi for LTE main, 2 dBi for LTE diversity and 2 dBic for GNSS, with VSWR below 3 on LTE and below 1.5 on GNSS. A 3 m coax lead with SMA male termination lets you place the antenna away from the router or gateway for a better signal.

  • Two-in-one LTE and GNSS antenna in a single housing
  • GNSS reception for GPS, GLONASS and Galileo
  • Gain: 2.5 dBi LTE main, 2 dBi LTE diversity, 2 dBic GNSS
  • VSWR below 3 (LTE) and below 1.5 (GNSS)
  • IP67-rated housing with adhesive mounting
  • Remote design with 3 m coax and SMA male termination
  • Move the antenna out of a metal cabinet or vehicle interior with the 3 m remote lead
  • Handle cellular data and location tracking with one antenna

The Lantronix A14H0 combines LTE and GNSS antennas in a single remote unit. It suits cellular gateways, routers and trackers installed inside cabinets, control panels or vehicles, where the device itself cannot see the sky or a nearby tower. The antenna connects over 3 m of coax, so the router can stay in the enclosure while the antenna sits on a window, roof panel or the outside of the cabinet.

The unit carries LTE main and LTE diversity elements along with a GNSS element for GPS, GLONASS and Galileo positioning. Lantronix rates the gain at 2.5 dBi for LTE main, 2 dBi for LTE diversity and 2 dBic for GNSS. VSWR is below 3 on the LTE side and below 1.5 on the GNSS side. With main and diversity elements, a gateway that supports LTE receive diversity can use both paths from one housing.

The IP67 rating means the housing is protected against dust and temporary immersion, which suits outdoor cabinets, kiosks, vehicles and industrial sites. It mounts with adhesive, so there is no drilling beyond the cable route, and the SMA male connectors fit gateways with SMA antenna ports.

Choose the A14H0 when a site needs both cellular connectivity and location data and you would rather run one weather-rated antenna than separate LTE and GPS units.

Ideal for

  • Remote antenna for cellular gateways installed in metal cabinets or control panels
  • Vehicle and fleet installations needing LTE plus GPS location
  • Outdoor kiosks, signage and remote monitoring sites
  • Industrial IoT deployments needing a weather-rated combined antenna

Specifications

GNSS

Gain GNSS
2 dBic (GNSS)
Vswr GNSS
VSWR < 1.5 (GNSS)
Constellations
GPS / GLONASS / Galileo

General

MPN
A14H0
UPC
783384240414
Brand
Lantronix
Product Type
Two-in-One LTE + GNSS Antenna

Cellular

Vswr LTE
VSWR < 3 (LTE)
Technology
LTE
Gain LTE Main
2.5 dBi (LTE Main)
Gain LTE Diversity
2 dBi (LTE Diversity)

Physical

Mounting
Adhesive Remote Mount
Connector
SMA Male
Cable Length
3 m Coax
Ingress Protection
IP67

Questions buyers ask

Is the A14H0 suitable for outdoor use?

Yes. The antenna is IP67 rated.

What gain does it provide?

2.5 dBi on LTE main, 2 dBi on LTE diversity and 2 dBic on GNSS.

How long is the cable and what connector does it use?

It is a remote antenna with 3 m of coax, terminated in SMA male.

Which satellite systems does it support?

GPS, GLONASS and Galileo.

More Antennas & Signal