Cloud Care Networks
LantronixAntennas & Signal

Lantronix A31M0 Single LTE Adhesive-Mount Remote Antenna with 3 m RG174 Cable

4G LTEMPN A31M0
  • Single (SISO)
  • Under 3 dBi
  • 1–3 m
$11.47

Backordered · ships as soon as it arrives

1
Request a quote · volume, multi-site or with plans

Overview

The Lantronix A31M0 is a single LTE remote antenna built for the Lantronix X300 Series. It mounts with adhesive, is rated at 2 dBi gain, and uses a 3000 mm (3 m) RG174 cable that ends in an SMA male connector. The cable lets you place the antenna away from the device, where it can get better cellular reception.

  • Single LTE remote antenna
  • 2 dBi antenna gain
  • Adhesive mount
  • 3000 mm RG174 coaxial cable
  • SMA male connector
  • Compatible with the Lantronix X300 Series, listed for the X303
  • Place the antenna where LTE signal is strongest while the device stays in its enclosure
  • Adhesive mounting means no drilling or bracket hardware is needed

The Lantronix A31M0 is a single LTE antenna for remote mounting. Lantronix lists it as a mobility accessory for its Industrial IoT gateways, modems and routers, and names the X300 Series as the compatible product line. In the X300 Series part-number table it appears as "X303 Only". That makes it a direct choice for teams that run X303 units and need to move the LTE antenna off the device and into a better spot.

The antenna is rated at 2 dBi gain and mounts with adhesive, so it can go on a flat surface without drilling. It connects through a 3000 mm (about 9.8 ft) RG174 coaxial cable with an SMA male connector. That length is enough to route the antenna from an equipment enclosure, cabinet or desk-level install to a nearby window, panel or wall where cellular signal is stronger.

For field-operations leads and IT managers, a remote antenna is a practical way to improve LTE reception without moving the device itself. The gateway can stay secured inside a cabinet or rack while the antenna sits where it can reach the carrier network. The A31M0 ships as a single bulk-packaged unit.

Ideal for

  • Relocating the LTE antenna of a Lantronix X303 installed inside a cabinet or enclosure
  • Improving LTE reception for an X300 Series unit by mounting the antenna on a window or panel
  • Replacement or spare antenna for X303 deployments
  • Industrial IoT installations where the device must stay secured away from the best signal location

Specifications

General

MPN
A31M0
UPC
783384240506
Brand
Lantronix
Product Type
Single LTE Remote Antenna
Antenna Reference
JCG017L

Package

Package Type
Bulk
Shipping Weight
0.35 lbs
Packaged Quantity
1

Cellular

Technology
LTE
Application
Cellular Network
Antenna Gain
2 dBi

Physical

Connector
SMA Male
Cable Type
RG174
Mount Type
Adhesive Mount
Cable Length
3000 mm (3 m)

Compatibility

Part Table Listing
X303 Only
Compatible Products
Lantronix X300 Series

Questions buyers ask

Which Lantronix devices does the A31M0 work with?

Lantronix lists the A31M0 as compatible with the X300 Series. In the X300 Series part-number table it is listed as "X303 Only".

How long is the cable?

The antenna uses a 3000 mm (3 m) RG174 coaxial cable.

What connector does it use?

It ends in an SMA male connector.

How is the antenna mounted?

It is an adhesive-mount antenna, so it attaches to a clean, flat surface without drilling.

What is the antenna gain?

The A31M0 is rated at 2 dBi.

More Antennas & Signal