
Cradlepoint
5G & LTE Routers
Cellular routers and firewalls for offices, vehicles and industrial sites.
Made for Fortinet
In stockShips from the US
The Fortinet FANT-11IN1-RCT-5M is a rugged 11-in-1 outdoor and vehicle antenna. It combines eight 5G/LTE MIMO elements, two Wi-Fi MIMO elements and one active GNSS element in a single IP67 and IK08 rated rectangular housing. Integrated 5 m low-loss cables terminate in SMA male connectors for cellular and GNSS and RP-SMA male connectors for Wi-Fi. It is built for FortiGate (FG), FortiGate Rugged (FGR), FortiExtender (FEX) and FEV models with cellular capability.
The Fortinet FANT-11IN1-RCT-5M consolidates a full multi-radio antenna system into one weatherproof enclosure for Fortinet cellular appliances. Eight omni-directional 5G/LTE MIMO elements cover 617-698 MHz (5G NR Band 71) through 5150-5925 MHz. That range includes the 700 MHz, 800/900 MHz, 1500 MHz, 1710-2200 MHz, 2300-2690 MHz and 3300-5000 MHz ranges used for bands such as n77, n78 and n79. Two Wi-Fi MIMO elements are characterized at 2400-2500, 5150-5850 and 5925-7125 MHz. An active GNSS element with a front-end SAW filter and low-noise amplifier (about 28-30 dB gain) supports GPS, GLONASS, BeiDou and Galileo, with L1/L5 coverage for GPS, QZSS and SBAS.
The housing is built for vehicle roofs and outdoor surfaces. It has a PC casing rated IP67 for water and dust and IK08 for impact, and an M27 x 2.0P mounting thread. It is rated for operation from -40°C to 85°C. Each cellular and Wi-Fi feed runs 0.15 m of TGC-1.5DS into 4.85 m of low-loss TGC-200. The GNSS feed uses 5 m of RGC-174. This lets installers place the antenna where signal is strongest while keeping the appliance protected in a cabinet or cab.
The antenna is intended for FG, FGR, FEX and FEV models with cellular capability. It does not apply to the FortiExtenderWAN 50G-AM, FortiExtenderWAN 50G-EA or FortiExtender Rugged 511G, which use internal antennas. Per-element efficiency, average gain and peak gain figures for every MIMO port are published in the Fortinet Rugged Accessories Data Sheet and reproduced in the specifications below. The unit is RoHS and REACH compliant.
Fortinet lists it as compatible with FG, FGR, FEX and FEV models with cellular capability. It does not apply to the FortiExtenderWAN 50G-AM, FortiExtenderWAN 50G-EA or FortiExtender Rugged 511G, which use internal antennas.
Each feed has an integrated 5 m cable. The 5G/4G and GNSS leads end in SMA male connectors, and the two Wi-Fi leads end in RP-SMA male connectors. Cellular and Wi-Fi runs use 0.15 m of TGC-1.5DS plus 4.85 m of low-loss TGC-200; the GNSS run uses 5 m of RGC-174.
The eight 5G/LTE elements are specified across 617-698, 698-824, 824-960, 1427-1518, 1710-2200, 2300-2690, 3300-5000 and 5150-5925 MHz. That span includes 5G NR Band 71 and bands such as 42, 48, 77, 78 and 79.
Yes. It includes a front-end SAW filter and a low-noise amplifier with about 28-30 dB of gain. It draws 5 mA from a 1.8-5.5 V supply and supports GPS, GLONASS, BeiDou and Galileo.
It is designed for surface mounting outdoors or roof mounting on vehicles, using an M27 x 2.0P thread. The housing measures 330 x 75.5 x 45.2 mm and weighs 2.52 kg.

Cradlepoint

Cradlepoint

Cradlepoint

Cradlepoint