Cloud Care Networks
Mobile MarkAntennas & Signal

Mobile Mark LTMWG940 4x 5G/LTE + GNSS 5-Cable Surface Mount Antenna, White, 15 ft (SP529)

5GMPN LTMWG940-A3PAB3PAC00G2PA-WHT-180-SP529
  • 4x4 MIMO
  • GNSS
  • 3–5 m
$242.76$462.50Save $219.74

In stockShips from the US

1
Request a quote · volume, multi-site or with plans

Datasheets & documents

Overview

The Mobile Mark LTMWG940 is a 5-cable surface mount antenna with four 5G/LTE elements and one GNSS element in a compact, low-profile radome. The cellular elements cover 617-960 MHz and 1710-7200 MHz for single-carrier 4x MIMO or dual-carrier 2x MIMO 5G. The GNSS element supports GPS, Galileo, GLONASS, QZSS and BeiDou. This SP529 special build comes with a white radome and 15 ft (180 in) cables.

  • Four 5G/LTE elements plus one GNSS element on five separate cables
  • Cellular coverage of 617-960 MHz (2 dBi) and 1710-7200 MHz (5 dBi), backwards compatible with 4G LTE
  • Single-carrier 4x MIMO 5G or dual-carrier 2x MIMO 5G operation
  • Multi-constellation GNSS (GPS, Galileo, GLONASS, QZSS, BeiDou) with 26 dB LNA
  • IP69K stud mount, -40°C to +80°C, IEEE-1478/EN 61373/MIL-810G/TIA 329.2-C
  • SP529 build: white radome, 180 in (15 ft) cable length
  • Feed all four cellular ports on a 5G router from a single compact roof or surface mount
  • Run dual-carrier 2x MIMO for redundancy or single-carrier 4x MIMO for throughput

The Mobile Mark LTMWG940 is a multiband surface mount antenna for routers that need four cellular antenna ports plus positioning. It fits fleet vehicles, transit buses, fixed-site private networks and advanced mobile router installations. Four 5G/LTE elements and one GNSS element sit inside a 5.50 in diameter, 2.38 in tall radome, which Mobile Mark describes as one of the smallest in the industry. The model has no Wi-Fi elements, so it stays focused on cellular MIMO and GNSS.

Each cellular element covers 617-960 MHz at 2 dBi and 1710-7200 MHz at 5 dBi. That range spans Sub-6 5G and is backwards compatible with 4G LTE. The four elements support single-carrier 4x MIMO 5G or dual-carrier 2x MIMO 5G. The GNSS element receives 1561, 1575 and 1602 MHz with a 5 dBi RHCP pattern and a 26 dB LNA, covering GPS, Galileo, GLONASS, QZSS and BeiDou. Cables are colour-coded: LTE-A green, LTE-B red and GNSS yellow.

The antenna is built for vehicle and outdoor duty. It has an ASA UV-inhibitive plastic radome, a corrosion-resistant aluminum base, and a -40°C to +80°C operating range. It is tested to IEEE-1478, EN 61373, MIL-810G and TIA 329.2-C shock and vibration standards, and rated IP69K when properly stud mounted. It mounts through a 7/8 in hole on surfaces up to 1/2 in thick.

This part number is a special build (SP529) with a white radome and 180 in (15 ft) cable length, Its cable-connector codes differ from the standard LTMWG940 build (1 ft pigtails with 14 ft SMA jumpers), and Mobile Mark does not publish the SP529 connector definition, so confirm the terminations your radio needs. The Mobile Mark spec sheet is available.

Ideal for

  • Vehicle fleet management and telematics with 5G/LTE MIMO and GNSS tracking
  • Public transit buses and shuttles with connected passenger systems
  • Fixed-site private 5G/LTE and fixed wireless deployments
  • Advanced mobile routers with four cellular antenna ports

Specifications

Build

Cable Length
180 in (15 ft)
Special Build
Special build SP529

General

MPN
LTMWG940-A3PAB3PAC00G2PA-WHT-180-SP529
Brand
Mobile Mark
Model
LTMWG940 (4x 5G/LTE + GNSS)
Product Type
5-Cable 5G Multiband Surface Mount Antenna
Configuration
4x 5G/LTE + 1x GNSS, no Wi-Fi
Country OF Origin
Made in the USA & UK

Electrical

Vswr
5G/LTE < 2.5:1 over range (with 12 in LMR-100)
Impedance
50 Ohm nominal
GNSS Current
10 mA typical, 20 mA max
MIMO Support
Single-carrier 4x MIMO or dual-carrier 2x MIMO 5G
Power Rating
10 Watts
GNSS Bias Voltage
2.7 to 5 VDC
Frequency Gain GNSS
1561/1575/1602 MHz, LNA 26 dB, 5 dBi RHCP (cable 5)
GNSS Amplifier Gain
26 dB +/- 3 dB
GNSS Constellations
GPS, Galileo, GLONASS, QZSS, BeiDou
Frequency Gain 5G LTE Low
617-960 MHz, 2 dBi (cables 1-4)
Frequency Gain 5G LTE High
1710-7200 MHz, 5 dBi (cables 1-4)

Mechanical

Color
White (also available in black)
Mounting
7/8 in (22 mm) feed-through, 3/4 in (19 mm) thread, up to 1/2 in (13 mm) surface
Cable Count
5 cables
Base Material
Corrosion-resistant aluminum
Radome Material
ASA UV-inhibitive plastic
Radome Dimensions
5.50 in (139 mm) diameter x 2.38 in (60 mm) height
Cable Identification
Colour-coded: LTE-A green, LTE-B red, GNSS yellow

Environmental

Rohs Compliant
RoHS compliant
Shock Vibration
IEEE-1478, EN 61373, MIL-810G, TIA 329.2-C
Ingress Protection
IP69K stud mount / IP67 mag-mount, when properly mounted
Operating Temperature
-40°C to +80°C

Questions buyers ask

Does the LTMWG940 support 4x4 MIMO?

Yes. The four cellular elements support single-carrier 4x MIMO 5G or dual-carrier 2x MIMO 5G, and they are backwards compatible with 4G LTE.

Which satellite systems does the GNSS element receive?

GPS, Galileo, GLONASS, QZSS and BeiDou, via an active element with a 26 dB LNA powered by 2.7 to 5 VDC bias.

How does this SP529 build differ from the standard LTMWG940?

The SP529 is a special build with a white radome and 180 in (15 ft) cable length. Its cable-connector codes differ from the standard LTMWG940, which uses 1 ft pigtails with 14 ft SMA jumpers. Mobile Mark does not publish the SP529 connector definition.

Does it include Wi-Fi elements?

No. For Wi-Fi 6E elements, Mobile Mark offers the LTMWG941, LTMWG942 and LTMWG943.

More Antennas & Signal