Cloud Care Networks
Teltonika

Product photo coming soon

TeltonikaAntennas & Signal

Teltonika PR1KC640 5G Combo MIMO Roof Antenna, Cellular + GNSS + Wi-Fi, SMA

5GMPN PR1KC640
  • 4x4 MIMO
  • GNSS
  • Wi-Fi

Made for Teltonika

$148.11$181.15Save $33.04

Backordered · ships as soon as it arrives

1
Request a quote · volume, multi-site or with plans

Overview

The Teltonika PR1KC640 is the full-stack roof antenna for Teltonika's 5G routers - MIMO 5G cellular, GNSS, and Wi-Fi elements in one low-profile housing with SMA-terminated leads. It terminates in a SMA connector for tool-free installation. One roof housing feeds the 5G modem, the position fix, and the Wi-Fi radio - three systems, one hole pattern.

  • SMA connector termination
  • Vehicle roof mount mounting
  • Integrated cable: Factory-attached leads
  • Specified for Teltonika 5G routers (RUTX50 class) in vehicles hardware
  • Teltonika part number PR1KC640
  • UPC 4779051841394
  • Standardize spares across Teltonika 5G routers (RUTX50 class) in vehicles deployments with one factory-specified part
  • Install in seconds - hand-thread the SMA connector onto the port, no tools or software

The PR1KC640 sits at the top of Teltonika's combo roof antenna range: a vehicle roof-mount housing combining MIMO cellular elements rated for 5G service with a GNSS element for positioning and a Wi-Fi element for onboard WLAN. All leads terminate in SMA plugs matched to Teltonika's router ports, and at roughly 2.5 lb the housing is built for permanent bolt-through vehicle installs rather than temporary magnets. For fleets deploying RUTX50-class 5G routers in vehicles, it is the factory-specified way to get every radio out of the cabin and onto the roof.

The combination antenna is tuned for 5G cellular, GNSS, and Wi-Fi service and terminates in a SMA connector. Roof placement is where 5G mid-band lives or dies in a vehicle - glass-mounted compromises give away real throughput.

Bolt the housing through the roof, seal, and run the SMA leads to the router: cellular pair to the modem, GNSS to the position port, Wi-Fi to the WLAN port. Verify lead count against your router model in Teltonika's documentation.

Cloud Care Networks stocks the Teltonika PR1KC640 alongside the gateways and routers it supports, so IT and field-service teams can consolidate antennas, spares, and replacement hardware on a single order.

Ideal for

  • Vehicle fleets on Teltonika 5G routers
  • Public transport with onboard Wi-Fi and tracking
  • Service fleets needing GNSS plus 5G WAN
  • Mobile installs consolidating three antennas

Specifications

Package

UPC
4779051841394
Quantity
1 antenna per package
Shipping Weight
2.5 lb

Cellular

Network Support
MIMO 5G cellular + GNSS + Wi-Fi combination
Radiation Pattern
Omnidirectional

Physical

Cable
Factory-attached leads
Mounting
Vehicle roof mount
Connector
SMA

Questions buyers ask

Which hardware is the PR1KC640 designed for?

It is designed for Teltonika's 5G-capable routers with MIMO cellular, GNSS, and Wi-Fi antenna ports - the RUTX50 class. All terminations are SMA-type; check your router's port genders and count in Teltonika's antenna documentation before ordering.

What connector does it use?

It uses a SMA connector. Confirm your router or gateway exposes a matching port before ordering; most fixed wireless devices in this class do.

What is included in the box?

One combination antenna, individually packaged. Cables, adapters, or mounting hardware beyond what is listed are not included.

Is there a warranty?

It is covered under Teltonika's standard accessory warranty. Cloud Care Networks can confirm the current term and handle RMAs on your behalf.

More Antennas & Signal