Cloud Care Networks
Teltonika

Product photo coming soon

TeltonikaAntennas & Signal

Teltonika PR1KCO28 Combo MIMO LTE + GNSS + Wi-Fi Roof Antenna for RUT955/RUTX11

4G LTEMPN PR1KCO28
  • 2x2 MIMO
  • GNSS
  • Wi-Fi

Made for Teltonika

$63.75$77.97Save $14.22

Backordered · ships as soon as it arrives

1
Request a quote · volume, multi-site or with plans

Overview

The Teltonika PR1KCO28 wires the RUT955 and RUTX11 for the road: two LTE MIMO elements, a GNSS element, and Wi-Fi in one roof-mount housing with SMA leads. It terminates in a SMA connector for tool-free installation. Cellular, position, and Wi-Fi from a single roof part - the full RUT955 vehicle build in one penetration.

  • SMA connector termination
  • Vehicle roof mount mounting
  • Integrated cable: Factory-attached leads (4)
  • Specified for Teltonika RUT955 and RUTX11 routers hardware
  • Teltonika part number PR1KCO28
  • UPC 4779051840977
  • Standardize spares across Teltonika RUT955 and RUTX11 routers deployments with one factory-specified part
  • Install in seconds - hand-thread the SMA connector onto the port, no tools or software

The RUT955 and RUTX11 are Teltonika's do-everything routers - cellular WAN, GNSS tracking, and dual-purpose Wi-Fi - and the PR1KCO28 is the roof antenna that serves all of it. The housing carries two LTE elements arranged for 2x2 MIMO, a GNSS element for the tracking feed, and a Wi-Fi element for cabin or yard WLAN, each lead terminated SMA for direct connection. One bolt-through install replaces four separate antennas, and because Teltonika specifies the part for these models, the RF configuration stays inside what the router was certified with.

The combination antenna is tuned for 4G LTE cellular, GNSS, and Wi-Fi service and terminates in a SMA connector. Getting the Wi-Fi element out of the cabin extends coverage to yards and job sites the in-cab whip never reached.

Bolt through the roof, seal, and connect: two leads to mobile, one to GNSS, one to Wi-Fi. The router's signal pages confirm all four paths in minutes, and the install repeats cleanly across a fleet.

Cloud Care Networks stocks the Teltonika PR1KCO28 alongside the gateways and routers it supports, so IT and field-service teams can consolidate antennas, spares, and replacement hardware on a single order.

Ideal for

  • RUT955 telematics vehicles
  • RUTX11 fleet installs with onboard Wi-Fi
  • Service trucks serving yard WLAN
  • Vehicles consolidating four antennas into one

Specifications

Package

UPC
4779051840977
Quantity
1 antenna per package

Cellular

Network Support
2x2 MIMO LTE + GNSS + Wi-Fi combination
Radiation Pattern
Omnidirectional

Physical

Cable
Factory-attached leads (4)
Mounting
Vehicle roof mount
Connector
SMA

Questions buyers ask

Which hardware is the PR1KCO28 designed for?

Teltonika specifies it for the RUT955 and RUTX11. Routers with the same port complement - two SMA mobile, GNSS, and Wi-Fi - can also use it; check connector genders in the antenna documentation first.

What connector does it use?

It uses a SMA connector. Confirm your router or gateway exposes a matching port before ordering; most fixed wireless devices in this class do.

What is included in the box?

One combination antenna, individually packaged. Cables, adapters, or mounting hardware beyond what is listed are not included.

Is there a warranty?

It is covered under Teltonika's standard accessory warranty. Cloud Care Networks can confirm the current term and handle RMAs on your behalf.

More Antennas & Signal