Cloud Care Networks
TaoglasAntennas & Signal

Taoglas Raptor X 7-in-1 5G/4G, GNSS and Wi-Fi Combination Antenna with 8 m Cable and FAKRA GNSS Connector

5GMPN RAPX.7.1G4C2W.8M.F20.B
  • 4x4 MIMO
  • GNSS
  • Wi-Fi
  • Over 5 m
$253.31$301.56Save $48.25

In stockShips from the US

1
Request a quote · volume, multi-site or with plans

Datasheets & documents

Overview

The Taoglas Raptor X (MA8007 series) is a low-profile 7-in-1 permanent-mount combination antenna for 5G/4G routers and gateways. It houses four wideband 5G/4G MIMO elements covering 600-6000 MHz, an active dual-band GNSS L1/L5 element and two dual-band Wi-Fi elements. The enclosure measures 350 x 70 x 39 mm and is rated IP69K and IK10. This ordering variant ships with 8 m RG-174/TGC-302 cabling and a female FAKRA Code C Gen 2 connector on the GNSS lead.

  • 7-in-1 design: 4x 5G/4G MIMO, 1x GNSS and 2x Wi-Fi antennas in one housing
  • Wideband 5G/4G cellular coverage from 600 to 6000 MHz, including Band 71 and 3300-5000 MHz 5G NR
  • Active dual-band GNSS L1/L5 with LNA (32.3 dB high-band gain, 2.4 dB noise figure)
  • Dual-band Wi-Fi at 2400-2500 MHz and 5150-5850 MHz
  • Low-profile 350 x 70 x 39 mm PC enclosure, IP69K and IK10 rated, M22 thread screw mount
  • 8 m RG-174/TGC-302 cabling with female FAKRA Code C Gen 2 GNSS connector
  • Serve 4x4 MIMO cellular, GNSS and Wi-Fi from one roof or cabinet penetration instead of several separate antennas
  • Keep 5G and LTE performance across low, mid and C-band spectrum with a single wideband 600-6000 MHz array

The Taoglas Raptor X MA8007 is a 7-in-1 combination antenna built for current and next-generation cellular routers and gateways. One screw-mount housing carries four 5G/4G MIMO antennas, one GNSS antenna and two Wi-Fi antennas. It replaces a cluster of separate antennas on a vehicle roof or an equipment cabinet. This part number, RAPX.7.1G4C2W.8M.F20.B, is a factory cable and connector configuration of the MA8007. It has 8 m of RG-174/TGC-302 cable and a female FAKRA Code C Gen 2 connector on the GNSS lead.

The cellular elements are wideband from 600 to 6000 MHz. That range covers low-band 5G and LTE such as Band 71 (617-698 MHz) and Bands 12, 13, 14, 17, 28 and 29. It continues through the mid-band ranges and up to 5G NR n77, n78 and n79 territory at 3300-5000 MHz, and LTE 5200 at 5150-5925 MHz. Each element is linear, omnidirectional, 50 Ω and rated for 2 W input.

The GNSS element is dual-band L1/L5 with an integrated LNA (32.3 dB high-band gain, 2.4 dB noise figure, 16.8 mA). It tracks GPS L1/L5, GLONASS G1, Galileo E1/E5a, BeiDou B1C/B1I/B2a, QZSS, NavIC L5 and SBAS for improved positional accuracy. Two Wi-Fi elements cover 2400-2500 MHz and 5150-5850 MHz for in-vehicle or on-site hotspots.

The housing is 39 mm tall and 70 mm wide. That suits vehicle roofs, where height limits are commonly below 80 mm, and it fits between roof ribs and on NEMA cabinets. It installs through an M22 thread. The PC enclosure is rated IP69K for water and dust, IK10 for impact, and -40 °C to +85 °C for temperature. Typical deployments include emergency and first-responder vehicles, EV charger stations, smart industry and warehouse sites, and private LTE networks.

Ideal for

  • Emergency and first-responder vehicles that need 5G, GNSS and onboard Wi-Fi from one roof antenna
  • EV charger stations with cellular backhaul and location services
  • Smart industry and warehouse gateways mounted on NEMA cabinets
  • Private LTE network endpoints needing 4x4 MIMO
  • Fleet vehicles with limited roof height

Specifications

Wi-Fi

Elements
2 x Wi-Fi MIMO
Impedance
50 Ω
Wi-Fi 2ghz
2400-2500 MHz: efficiency 50.0-53.7%, peak gain up to 6.71 dBi
Wi-Fi 5ghz
5150-5850 MHz: efficiency 44.3-46.8%, peak gain up to 6.82 dBi
Polarization
Linear
Test Condition
Measured with 0.3 m cable on 30 x 30 cm ground plane
Max Input Power
2 W
Radiation Pattern
Omnidirectional

Cabling

Cable Type
RG-174/TGC-302
Cable Length
8 m
GNSS Connector
FAKRA Code C Gen 2, female

General

MPN
RAPX.7.1G4C2W.8M.F20.B
Vswr
2:1
Brand
Taoglas
Series
Raptor X
Gain Max
32.3 dB (GNSS LNA, high band)
Impedance
50 Ω
Technology
External combination antenna
Polarization
Linear (cellular/Wi-Fi), RHCP (GNSS)
Standard Model
Ordering variant of MA8007.A.001
Frequency Range
600-6000 MHz
Antenna Configuration
7-in-1: 1 GNSS, 4 x 5G/4G MIMO, 2 x Wi-Fi MIMO

GNSS Lna

Lna Gain
32.3 dB high-band / 26.3 dB low-band (3.3 V typ.)
Noise Figure
2.4 dB high-band / 3.8 dB low-band
Input Voltage
+1.8 to 5.5 V
Output Impedance
50 Ω
Current Consumption
16.8 mA
Out OF Band Attenuation
60 dB at 500-1000, 2000-2690 and 3300-6000 MHz

GNSS Bands

GPS
GPS L1, L5
Qzss
QZSS L1, L5
Sbas
SBAS L1/E1/B1, L5/B2a/E5a, G1
Irnss
IRNSS/NavIC L5
Beidou
BeiDou B1C, B1I, B2a
Galileo
Galileo E1, E5a
Glonass
GLONASS G1
Not Supported
Not covered: GPS L2, GLONASS G2/G3, Galileo E5b/E6, BeiDou B2b/B3, L-Band, QZSS L2C/L6

Mechanical

Thread
M22 thread
Weight
840 g (0.84 kg)
Material
Polycarbonate (PC)
Dimensions
350 x 70 x 39 mm
Impact Rating
IK10
Mounting Style
Screw mount (permanent)

Environmental

Rohs
RoHS compliant
Reach
REACH compliant
Humidity
Non-condensing, 95% RH at 65 °C
Ingress Rating
IP69K
Operating Temperature
-40 °C to +85 °C

Cellular 5G 4G

Elements
4 x 5G/4G MIMO
Impedance
50 Ω
Polarization
Linear
Max Input Power
2 W
Band 617 698 MHz
617-698 MHz (B71): efficiency 36.4-49.8%, peak gain up to 2.25 dBi
Band 698 824 MHz
efficiency 35.4-50.3%, peak gain up to 2.94 dBi
Band 824 960 MHz
efficiency 37.5-50.8%, peak gain up to 2.64 dBi
Radiation Pattern
Omnidirectional
Band 1427 1518 MHz
efficiency 24.5-27.9%, peak gain up to 1.21 dBi
Band 1710 2200 MHz
efficiency 42.5-53.7%, peak gain up to 5.63 dBi
Band 2300 2690 MHz
efficiency 45.2-56.8%, peak gain up to 6.97 dBi
Band 3300 5000 MHz
efficiency 55.6-58.9%, peak gain up to 7.74 dBi
Band 5150 5925 MHz
efficiency 40.1-48.9%, peak gain up to 6.48 dBi

GNSS Electrical

GPS L1
-1.77 dB avg, 66.5%, 3.93 dBi peak, AR 11.7
GPS L5
-2.95 dB avg, 50.7%, 2.49 dBi peak, AR 5
Beidou B1
-2.00 dB avg, 63.0%, 3.93 dBi peak, AR 4.8
Impedance
50 Ω
Glonass G1
-2.62 dB avg, 54.7%, 3.38 dBi peak, AR 13.1
Polarization
RHCP

Questions buyers ask

What antennas are inside the Raptor X 7-in-1?

Four 5G/4G MIMO cellular antennas covering 600-6000 MHz, one active dual-band GNSS L1/L5 antenna and two dual-band Wi-Fi antennas for 2400-2500 MHz and 5150-5850 MHz.

What cable and GNSS connector does this part number use?

RAPX.7.1G4C2W.8M.F20.B is supplied with 8 m of RG-174/TGC-302 cable, and the GNSS lead ends in a female FAKRA Code C Gen 2 connector.

Is it suitable for vehicle roofs?

Yes. The housing is 39 mm tall and 70 mm wide, so it fits under typical roof height limits and between roof ribs. It installs through an M22 thread and is rated IP69K and IK10.

Does the GNSS element need power?

Yes. The GNSS antenna has an integrated LNA that runs from +1.8 to 5.5 V and draws 16.8 mA. It is normally powered by the router's GNSS port.

Which 5G bands does it cover?

The cellular elements span 600-6000 MHz. That includes Band 71 (617-698 MHz), the 1427-1518 MHz L-band range, and 3300-5000 MHz covering Bands 42, 48, 77, 78 and 79.

More Antennas & Signal