Cloud Care Networks
Panorama

Product photo coming soon

PanoramaAntennas & Signal

Panorama SF2-0191 M18x1 Thin Split Nut for M18 Antenna Fixings

MPN SF2-0191
$2.50

In stockFree 2-day shipping

1
Request a quote · volume, multi-site or with plans

Overview

The Panorama SF2-0191 is a m18x1 thin split nut for the M18 threaded fixing used by Panorama's through-hole mount antennas. The split design is the point: it fits around an installed cable, so a fixing can be completed in shallow clearances without cutting off connectors or pulling the loom back through the panel. Small hardware, but it is what makes antenna service work non-destructive.

  • M18x1 Thin Split Nut for M18 threaded antenna fixings
  • Split design fits around installed, terminated cables
  • Non-destructive service of through-hole antenna mounts
  • Documented Panorama spare for fleet maintenance
  • Panorama part number SF2-0191
  • Service M18 antenna fixings without cutting connectors off cables
  • Assemble the fixing around the loom in place
  • Stop leaks, spin, and rattle caused by missing hardware

Through-hole antennas clamp to a roof or panel with a threaded M18 fixing - and their cables are usually pre-terminated, which turns ordinary nut-and-washer work into a puzzle: a closed fixing cannot pass over a connector. The Panorama SF2-0191 is the answer - a m18x1 thin split nut that opens around the cable and assembles onto the M18 thread in place.

This is the thin variant of the M18x1 split nut: a reduced-height profile for installations where the standard nut fouls trim, headliners, or shallow cavities behind the mounting panel. Where clearance allows, the standard-height SF2-0016 gives more thread engagement.

Failed or missing M18 hardware is the classic cause of antenna leaks, spin-loose domes, and rattles. Keeping these fixings as documented spares means service work - swapping a gasket, re-torquing a base, moving an antenna between vehicles - never requires sacrificing a factory-terminated cable to do it.

Cloud Care Networks stocks Panorama's mounting and installation hardware alongside the antennas it supports, so site and fleet teams can order the complete install - antenna, mount, cable, and spares - in one place and keep rollouts on a documented bill of materials.

Ideal for

  • Re-fixing through-hole antennas with pre-terminated cables
  • Replacing corroded or lost M18 mounting hardware
  • Fleet antenna relocations between vehicles
  • Service stock for installers maintaining Panorama antennas

Specifications

Package

Shipping Weight
0.5 lb
Units Per Package
1 m18x1 thin split nut

Physical

Design
Split (fits around cable)
Thread
M18 x 1
Form Factor
M18x1 Thin Split Nut

Compatibility

Application
Panorama through-hole mount antennas with M18 fixings

Questions buyers ask

Why is it split?

So it can be fitted around a cable that already has connectors on it. A closed nut or washer would have to pass over the connectors - impossible with most factory-terminated antenna looms.

Which antennas use it?

Panorama through-hole mount antennas fixed with the M18 threaded base - a common convention across the low-profile and dome ranges. Check your antenna's fixing thread before ordering.

What is in the box?

One Panorama SF2-0191 m18x1 thin split nut. Antenna and other fixings are sold separately.

More Antennas & Signal