
Cradlepoint
5G & LTE Routers
Cellular routers and firewalls for offices, vehicles and industrial sites.
In stockFree 2-day shipping
The Ubiquiti UniFi 5G Max is a 5G NR and LTE modem for UniFi networks. It draws power from a single PoE input and connects over a 2.5 GbE RJ45 port. Downlink reaches 3.4 Gbps on 5G NSA networks, and it takes a Nano-SIM plus a second Nano-SIM or eSIM. It adopts through any UniFi PoE port with automatic setup and provides automatic failover, so it can serve as a primary or backup cellular WAN managed from the UniFi console.
The UniFi 5G Max adds cellular WAN to an existing UniFi deployment without a separate power supply or a new management platform. Connect it to any UniFi PoE port and it adopts into UniFi Network with automatic setup. From there it provides cellular internet with automatic failover. UniFi Network version 10.0.162 or later is required, and the console or Cloud Gateway must be updated over another internet connection before adoption.
The radio covers 27 5G NR bands, including n41, n71, n77 and n79, along with 31 LTE bands and 3G UMTS fallback. It uses HPUE power class 2 transmit power of 26 dBm on 5G and 25 dBm on LTE, fed by four embedded cellular antennas. Peak downlink is 3.4 Gbps on 5G NSA, 1.8 Gbps on 5G SA and 1.6 Gbps on LTE. Peak uplink is 560 Mbps on NSA, 650 Mbps on SA and 210 Mbps on LTE. Actual speed depends on coverage at the installation site. A single 2.5 GbE RJ45 port carries both data and PoE power, and maximum consumption is 14.5 W.
The unit measures 180 x 109 x 33.8 mm and weighs 410 g. It ships with a desktop stand, a wall mount and a window mount, so you can place it where the signal is strongest. A 1.3-inch touchscreen shows status on the device. The enclosure is IK04 tamper-resistant, and the modem is NDAA compliant and certified for FCC, IC, CE, PTCRB, GCF, AT&T and T-Mobile. It fits branch offices, retail sites and small businesses that already run UniFi and want a cellular link managed alongside the rest of the network.
It is powered over PoE through its single 2.5 GbE RJ45 port and draws a maximum of 14.5 W. Connect it to a UniFi PoE port and it adopts automatically.
It takes one Nano-SIM plus a second Nano-SIM or an eSIM. The second Nano-SIM cannot be used while an eSIM is active.
UniFi Network version 10.0.162 or later. Your UniFi console or Cloud Gateway must be updated over another internet connection, such as a standard ISP link, before you adopt the U5G-Max.
Peak downlink is 3.4 Gbps on 5G NSA, 1.8 Gbps on 5G SA and 1.6 Gbps on LTE. Peak uplink is 560 Mbps, 650 Mbps and 210 Mbps respectively. Real-world speed depends on coverage at the installation location.
Yes. A desktop stand, a wall mount and a window mount are all included.

Cradlepoint

Cradlepoint

Cradlepoint

Cradlepoint